(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Water pressure gauge doesn't seem to be working

Hybrid View

  1. #1

    Default Water pressure gauge doesn't seem to be working

    I've noticed that the water pressure gauge on my well pump stays at a constant 39 psi. I used to see if cycle as the water pressure decreased/increased. I've noticed that the pressure control still clicks on/off periodically, but the pressure gauge never changes. Is my gauge bad? It's about 4 years old.

  2. #2
    Plumber Cass's Avatar
    Join Date
    Nov 2005
    Location
    Ohio
    Posts
    5,984

    Default

    It sounds like it. The tube going to it could be pluged with something. Try removing the gauge and tube and be sure the passage ways are clear. I doubt it will work but might be worth a try.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •