Reply With QuoteIf you are thinking of the fitting below the flange, then a medium 90 would do.
Past that, like say at the bottom of a stack, you would need a long turn 90.
|
|
|
Bends for toilet?
What 90 degree bends are acceptable for installing a toilet drain line when transitioning from vertical to horizontal? Any input would be appreciated!
Last edited by TEvans; 12-22-2004 at 01:14 PM.
If you are thinking of the fitting below the flange, then a medium 90 would do.
Past that, like say at the bottom of a stack, you would need a long turn 90.
Posting Permissions
Bookmarks