(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Leaking Price Pfister Handles

  1. #1
    DIY Junior Member Elapidae's Avatar
    Join Date
    Dec 2004
    Location
    Texas
    Posts
    13

    Question Leaking Price Pfister Handles

    What a wonderful forum!!! Boy do I have a lot of questions. (Please bear with me)

    I just replaced the diverter and valve bodies in my master shower. Mainly because the diverter had issues. The Hot and cold handles always leaked (into the handle) but I expected this behavior to stop when I put in the new hot and cold valve bodies on (valve body may not be the correct term). Much to my disappointment, the water still leaks from inside the handles (a small but steady stream). It’s as if the water is running down the brass valve stem (again, I may not be using the correct terms) to the inside of the handle and then out the handle. The stems came already assembled to the valve bodies (and I’m not sure they can be removed). When I installed the new valve bodies, I just used the nylon gaskets they came with and some Teflon tape but the leak doesn’t appear to be from the threaded connection I made when installing. What’s more disturbing is that the replacement knobs and pipe cover stems (chrome decorative covers for the pipe between the wall and handles) seem to leak water. This means that if I screw the fluted pipe cover stems firmly against the faux marble wall, they will fill with water and the water will run into the holes and down the wall.
    I’ve loosened the pipe cover stems so that I can clearly see the larger portion of the valve bodies (about 1.5 inches from the wall) and there is no water leaking from that portion of the valve body and yet it’s still running from the handle and pipe cover which again leads me to believe that it’s leaking from the valve stem portion of the valve body. Any idea how I can fix this? Thanks in advance.

    Last edited by Terry; 11-29-2009 at 02:33 PM.

  2. #2
    DIY Junior Member Elapidae's Avatar
    Join Date
    Dec 2004
    Location
    Texas
    Posts
    13

    Default

    Maybe this will help explain:
    Attached Images Attached Images  

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    OK, this will be easy for you: The nut you marked "seems to leak from here" is a packing nut. Beneath the nut is a rubber and fibre packing gland. The packing keeps water from leaking around the stem when the faucet is on. The nut is to tighten the packing appropriately.. First, use a little faucet grease on the stem just before it goes into the packing. Run the stem in a out a few times. Now, install the stem into the shower valve. Tighten the packing with a socket just about 1/4 turn. Now, turn on the water. Turn it on and off a few times. The stem should turn smoothly. If any water drips out past the stem, tighten the nut in 1/4 steps and retry, until there are not leaks. Now, reassemble your trim.

    That picture is worth a 1000 words as they say, and makes life very easy for us on this forum. Thank you very much!!!

  4. #4
    DIY Junior Member Elapidae's Avatar
    Join Date
    Dec 2004
    Location
    Texas
    Posts
    13

    Thumbs up

    Quote Originally Posted by jimbo
    OK, this will be easy for you: The nut you marked "seems to leak from here" is a packing nut. Beneath the nut is a rubber and fibre packing gland. The packing keeps water from leaking around the stem when the faucet is on. The nut is to tighten the packing appropriately.. First, use a little faucet grease on the stem just before it goes into the packing. Run the stem in a out a few times. Now, install the stem into the shower valve. Tighten the packing with a socket just about 1/4 turn. Now, turn on the water. Turn it on and off a few times. The stem should turn smoothly. If any water drips out past the stem, tighten the nut in 1/4 steps and retry, until there are not leaks. Now, reassemble your trim.

    That picture is worth a 1000 words as they say, and makes life very easy for us on this forum. Thank you very much!!!
    Fantastic!!! Thank you very much. I'm going to try this now.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •