George R
New Member
I would like to install a new toilet and sink in an existing 1st floor (large) closet with a full basement underneath (good access). I have a straight 30 ft run (3 in PVC) to an existing horizontal 3 in waste line from a 1st floor toilet. Vents are no problem, straight up to the attic from the existing closet.
The problem is, the best "fall" I can get on this 30 ft run is about 2 1/4 inches. I know it should be about 1/4 inch/ft., but is this 2 1/4 inch in 30 ft acceptable? There is no inspection, but I obviously want it to work properly.
I have a plan B, but it would be much more work.
Thanks in advance for any assistance.
The problem is, the best "fall" I can get on this 30 ft run is about 2 1/4 inches. I know it should be about 1/4 inch/ft., but is this 2 1/4 inch in 30 ft acceptable? There is no inspection, but I obviously want it to work properly.
I have a plan B, but it would be much more work.
Thanks in advance for any assistance.
Last edited: