Prashster
New Member
- Messages
- 936
- Reaction score
- 4
- Points
- 0
I am installing a new toilet and 3" pvc drain. Please tell me if this is ok:
1. Instead of closet bend, I used a 90 deg el. Ok?
2. There isn't enough vertical room to install a stub of pipe to get from the el to the flange so I got an inside-mount toilet flange that fits directly to the el. Is it ok to use this?
The plumbing supply place didn't sell inside-mount flanges bkz they said that no good plumber would use one. But I've found them to be readily available elsewhere (HD, L's, online). If they were really that obsolete, I would have thought they'd be harder to find (kind of like vent tees
Any help appreciated.
1. Instead of closet bend, I used a 90 deg el. Ok?
2. There isn't enough vertical room to install a stub of pipe to get from the el to the flange so I got an inside-mount toilet flange that fits directly to the el. Is it ok to use this?
The plumbing supply place didn't sell inside-mount flanges bkz they said that no good plumber would use one. But I've found them to be readily available elsewhere (HD, L's, online). If they were really that obsolete, I would have thought they'd be harder to find (kind of like vent tees
Any help appreciated.
Last edited: