CatlinHawk
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
I recently hired a plumber to repipe my house with PVC. When he finished, I didn't notice immediately that the two upstairs toilets are, respectively, 1/2" and 7/8" above the finished floor. THe gaps were filled with a horrible looking putty that has crumbled. The plumbers won't come back out, so I pulled the two toilets to see what the problem was and found that the toilet horns are sitting on the flange that the wax ring would normally bottom out on. The horn is 3.65" OD and the pipe below the hole is 3". I assume that the horn is supposed fit into the pipe. How do I fix this?