drilling faucet holes in..

Users who are viewing this thread

Tameria11

New Member
Messages
57
Reaction score
0
Points
0
Location
Ontario
The top side of the American Standard Caddet 5' whirlpool. I was hoping :confused: to have deck mount but not sure how to drill tub without the chance of cracking the tub, any info helpfull
Thanks
Dave (not the plumber guy)
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Another thing that doesn't hurt is to use some masking tape on the tub - it marks eaiser and helps to keep the drill center in place. In fact, you may want to drill a pilot hole prior to using the hole saw - still use the masking tape. It also can help to keep the edges from chipping.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks