kenny7275
Reporter
I have a two inch well casing 100ft deep static water level is 16 ft single pipe packer is forty ft deep I have a sta rite mse 7 one hp vertical pump new foot valve new leathers new forty ft schedual 60 one inch pvc
I have two qiestions one I'm only getting 4 to 5 gpm shouldn't it be more
Also if I isolate pump from blader tank preasire gauge drops in seconds but doesn't whe
n not isolated why
And also what should be cycle time if set at thirty fifty
I've ran well long periods striaght out hose and water is plentyfull and clear
I have two qiestions one I'm only getting 4 to 5 gpm shouldn't it be more
Also if I isolate pump from blader tank preasire gauge drops in seconds but doesn't whe
n not isolated why
And also what should be cycle time if set at thirty fifty
I've ran well long periods striaght out hose and water is plentyfull and clear