Temperature Pressure Relief Valve (TPR) re-location?

Users who are viewing this thread

Wallijonn

Member
Messages
335
Reaction score
15
Points
18
Location
Arizona
Is it possible to re-locate the temp/pressure valve from the side to the top? I like the Kenmore/A.O. Smith WHs but they have the pressure relief valve on the side. One of the features on a WH that I am interested in is minimal lime buildup within the WH. (To that end I am thinking of installing two sediment filters in line with a third charcoal filter before going to the WH.) My present WH is probably a Rheems and while the TPR is located at the top of the unit it also has what looks like a hex head bolt head on the side, perhaps suggesting that the TPR can be re-positioned. Can that be done on the Kenmores?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks