I have a Delta Kitchen faucet. It was leaking under the sink, so I got a rebuild kit and replaced all the parts--the two springs and rubber seats for hot and cold water, the cam and cam seal, plus the two o-rings that you have to remove the spout part to get at. There are still some drips below the sink...they're trickling down the hose that goes from the faucet to the sprayer. They seem to be coming from the faucet end of that hose.
Any hints as to what to do next? I didn't really crank down the handle, but maybe it needs to be tighter?
The leak only occurs when the faucet is on, so it's not on the supply side.
Thanks!
Any hints as to what to do next? I didn't really crank down the handle, but maybe it needs to be tighter?
The leak only occurs when the faucet is on, so it's not on the supply side.
Thanks!