Hello,
I'm designing a full bath for a small space. I would like to keep it as small as possible.
Trying to fit a 30 x 60 tub, toilet, and sink in a space about 5 x 6 feet.
I have looked at the codes required: P2705.1 and R307.1
My questions is how a corner sink relates to this:
"5. Water closets, lavatories and bidets. A water closet, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition or vanity or closer than 30 inches (762 mm) center-to-center between adjacent fixtures. There shall be at least a 21-inch (533 mm) clearance in front of the water closet, lavatory or bidet to any wall, fixture or door."
How do you measure the 15 inch clearance from center of a corner sink?
The picture below shows my proposed layout
These are the specs for the corner sink:
Barclay Petite Corner Wall Hung Basin Sink White
Petite Corner Wall Hung Basin Sink White
Exterior: W 17 3/8" x D 14 3/8"
Interior: W 9 3/4" x D 6 1/8" x H 4 7/8"
Sides: 12 3/8"
drilled for single-hole faucet
Meets or exceeds
the following
specifications: ASME A112.19.2
2008 and CSA B45.1-08 for
ceramic plumbing fixtures
Thanks
I'm designing a full bath for a small space. I would like to keep it as small as possible.
Trying to fit a 30 x 60 tub, toilet, and sink in a space about 5 x 6 feet.
I have looked at the codes required: P2705.1 and R307.1
My questions is how a corner sink relates to this:
"5. Water closets, lavatories and bidets. A water closet, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition or vanity or closer than 30 inches (762 mm) center-to-center between adjacent fixtures. There shall be at least a 21-inch (533 mm) clearance in front of the water closet, lavatory or bidet to any wall, fixture or door."
How do you measure the 15 inch clearance from center of a corner sink?
The picture below shows my proposed layout
These are the specs for the corner sink:
Barclay Petite Corner Wall Hung Basin Sink White
Petite Corner Wall Hung Basin Sink White
Exterior: W 17 3/8" x D 14 3/8"
Interior: W 9 3/4" x D 6 1/8" x H 4 7/8"
Sides: 12 3/8"
drilled for single-hole faucet
Meets or exceeds
the following
specifications: ASME A112.19.2
2008 and CSA B45.1-08 for
ceramic plumbing fixtures
Thanks