Here are my plans to install a stainless steel shower base. The thing has almost no pitch/slope and is just plain sheet metal, so I'm a little worried.
Anyway:
1. Staple plastic sheet to subfloor.
2. Trowel down thinset with a notched trowel, thicker at perimeter.
3. Set in base and try to level it, put weights around the drain assembly, and let it cure.
Thoughts? Advice?
Anyway:
1. Staple plastic sheet to subfloor.
2. Trowel down thinset with a notched trowel, thicker at perimeter.
3. Set in base and try to level it, put weights around the drain assembly, and let it cure.
Thoughts? Advice?