BMWMK2
New Member
- Messages
- 53
- Reaction score
- 0
- Points
- 0
I Just Soldered The Pipes For The New Bath Tub, I Assembled Them Seperatly And The Soldered It To The Two Pipes Coming Up Through The Floor Using 1/2" Copper Coulplings. I Went And Turned The Water On And There Is A Small Pinhole Leak Spraying From The Top Of One Of The Couplings. What Do I Do? Do I Heat It Back Up And Apply More Solder? Will Having Run Water Through It Be A Problem? I Alredy Turned The Water Off And Draind The Pipe From The Basement. Please Help Quick!!!
Thanks Mike
Thanks Mike