Dishwasher Tail Piece

Users who are viewing this thread

alrcsd

New Member
Messages
2
Reaction score
0
Points
0
Location
SD
Here's my problem I am remodeling have a 2 basin deep farm sink (10") with a 15" O.C. wall drain. with very limited space under. I was wondering if it was possible to splice/put the tail piece in-line (horizontal) with the continuous drain? Thx!
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,459
Points
113
Location
Bothell, Washington
Website
terrylove.com
Either way works.
I prefer pointing at one drain basket and teeing on the vertical, but I've done it in the middle and put in a horizontal tee too.
 

hj

Master Plumber
Messages
33,602
Reaction score
1,041
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
WIth the drain at 15", why isn't there enough space to put it in vertically? You should have at least 8" to do it, unless you have a long plastic sink drain.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks