(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Toilet Flange Issue

  1. #1
    DIY Junior Member ZippyZap's Avatar
    Join Date
    Jan 2014
    Location
    Nj
    Posts
    1

    Default Toilet Flange Issue

    Hello everyone - I purchased a universal toilet flange to be inserted into 4 inch cast iron. The flange can be found here: http://plumbest.com/spec_sheets/c4733p.pdf. My problem is that it will not fit - it is just too large to fit into the cast iron opening. I scraped and wire brushed the inside of the cast iron pipe thinking maybe some of the build up was preventing the flange from fitting nicely but it just will not fit.

    The measurements of the cast iron pipe are as follows: outside diameter=4 3/8 inches, inside diameter=3 13/16 inches.

    What options would you suggest at this point? Any particular flanges?

    Thanks!
    Last edited by ZippyZap; 01-05-2014 at 02:08 PM.

  2. #2
    Last edited by Terry; 04-08-2014 at 08:06 PM.

Similar Threads

  1. Toilet flange issue
    By stardog in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 3
    Last Post: 12-10-2013, 04:20 PM
  2. Help - toilet flange not level and flange support issue
    By mrcleaner in forum Toilet Forum discussions
    Replies: 2
    Last Post: 11-02-2012, 02:53 PM
  3. Toilet flange issue.
    By m3rdpwr in forum Toilet Forum discussions
    Replies: 15
    Last Post: 02-08-2011, 03:44 PM
  4. Toilet Flange Issue
    By jrgallant in forum Toilet Forum discussions
    Replies: 13
    Last Post: 01-24-2009, 05:46 AM
  5. Toilet Flange Issue
    By 01sesedan in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 8
    Last Post: 09-17-2008, 07:38 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •