(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Working sink for show display

  1. #1
    In the Trades rob herman's Avatar
    Join Date
    Jan 2014
    Location
    Toledo, Ohio
    Posts
    1

    Default Working sink for show display

    I work for a remodeling firm in Toledo, Ohio and we are looking to have a portable functioning sink for a show display. We would like to have a Touch2O faucet that would function normaly in our kitchen display. Does anyone know the steps it would take to make this happen? Any information or guidance toward more articles would help immensely. Thank You in advance

  2. #2
    DIY Senior Member Reach4's Avatar
    Join Date
    Sep 2013
    Location
    IL
    Posts
    1,247

    Default

    I think you are implying that for show you are probably going to want recycle the drain water to be fed back out of the faucet under pressure.

  3. #3
    In the Trades Tom Sawyer's Avatar
    Join Date
    Nov 2010
    Location
    Maine
    Posts
    2,933

    Default

    Yep, get one on the small under sink pump/tank sets and pipe the drain back to the faucet.
    [B]No, plumbing ain't rocket science. Unlike rocket science, plumbing requires a license[B]

  4. #4
    DIY Senior Member Smooky's Avatar
    Join Date
    Apr 2011
    Location
    NC
    Posts
    479

    Default

    I would set it up with a something like a Shurflo pump. I would use an electric pump if electricity is available if not you could use a 12 volt pump. You will need a tank to pump out of and for the water to drain back into. You may be able to recirculate the water or set it up like an RV with a fresh water tank and a waste tank.

    http://www.shurflo.com/rv-products/r...l/default.html

Similar Threads

  1. Burnham Alpine 80 Display
    By cad53 in forum Boiler Forum
    Replies: 1
    Last Post: 11-01-2011, 01:04 PM
  2. Installing indicator light to show pump working
    By blued in forum Pumps and Tanks Well Forum & Blog
    Replies: 23
    Last Post: 03-28-2011, 03:47 PM
  3. Using Faucet Display Model
    By Big Al in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 10
    Last Post: 09-03-2007, 10:03 AM
  4. Blank display on irrigation controller
    By La Duena in forum Irrigation / Sprinkler Forum
    Replies: 1
    Last Post: 08-22-2007, 01:02 PM
  5. sink not working
    By para1911 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 07-09-2006, 10:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •