jdog_kustoms
New Member
I have had trouble with this boiler since new big regret getting it but anyways the latest issue has me lost and i am a certified HVAC tech not a home owner my boiler wont light off all the time and locks out on ignition failure code #11
I have 14 inches of gas pressure when gas valve is closed and 11 when i do get it to run and burn
have new igniter and good spark
cleaned the flame rod
I have been having issues since new had to replace the igniter boot under a recall then replace the hole saga board and igniter boot again also under recall but i can never get the boiler to work all heating season with out having to keep resetting it but now it needs reset all the time
Any suggestions would be greatly appreciated
I have 14 inches of gas pressure when gas valve is closed and 11 when i do get it to run and burn
have new igniter and good spark
cleaned the flame rod
I have been having issues since new had to replace the igniter boot under a recall then replace the hole saga board and igniter boot again also under recall but i can never get the boiler to work all heating season with out having to keep resetting it but now it needs reset all the time
Any suggestions would be greatly appreciated