Jinmalibu
New Member
I have a 7 yr old Toto Ultramax (model 854??). Water keeps filling into the overfill tube after flushing. If I apply pressure to the side closest to the flush handle it will stop.
Should I start with a cap replacement or take it apart and clean it?
Also, I started messing with it before doing any research here. I turned the plastic adjustment screw which caused the top part of the valve to lift up an inch or so and the screw went down into the valve no longer in its place. After this happened the valve shut off after flushing for a little while but is back to over flowing.
Should I start with a cap replacement or take it apart and clean it?
Also, I started messing with it before doing any research here. I turned the plastic adjustment screw which caused the top part of the valve to lift up an inch or so and the screw went down into the valve no longer in its place. After this happened the valve shut off after flushing for a little while but is back to over flowing.