(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 8 of 8

Thread: Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf

  1. #1
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,221
    Blog Entries
    1

    Default Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf

    Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf





    American Standard Cadet Pro 10" Rough, 215CB.004






    Fluidmaster fill valve and 3" flush valve.



    Elongated bowl with standard height. 15"




    American Standard bowl



    The Pro Version
    Last edited by Terry; 11-30-2013 at 01:35 PM.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,221
    Blog Entries
    1

    Default



    Cadet Pro tank



    Red rubber tank to bowl gaseket on the left. The tubes on the right are for installing the tank bolts.












    Under the bowl rim
    Last edited by Terry; 11-30-2013 at 04:48 PM.

  3. #3
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,221
    Blog Entries
    1

    Default



    Cadet Pro 10" Rough before the seat is installed.

    At 10". there is about 3/4" behind the tank.

  4. #4
    DIY Senior Member wjcandee's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    1,599

    Default

    What's that white male-urination-appendage-looking thing in the flush hole in the bottom of the tank? Looking at your photo underneath the tank. (I tried to say "*****", but you see what happens.)

  5. #5
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,221
    Blog Entries
    1

    Default

    I have no idea what you are trying to say here
    Huh?

  6. #6
    DIY Senior Member wjcandee's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    1,599

    Default

    Quote Originally Posted by Terry View Post
    I have no idea what you are trying to say here
    Huh?
    Ah. Okay, look at the first photo of post #2, which you label as "Cadet Pro Tank". It's a shot from the bottom of the tank looking up. The flush hole has something roundish in it. It is white. It has a maybe 1/4" to 1/2" hole in it. [It is proportional to a schlong -- that was my point.] I'm wondering what that is.

    In thinking about it, I realize that the flapper has likely already been installed and this may be the bottom of the flapper, like a round ball with a hole in it. However, the flapper is red and this is white. Does the PRO have a red flapper with a white plastic insert, or is that something else?

  7. #7
    DIY Senior Member Reach4's Avatar
    Join Date
    Sep 2013
    Location
    IL
    Posts
    1,285

    Default

    Rorschach?

    What is that big red plastic thing in the next picture down. Is that a wrench to give a better grip on the big white nut under the tank?

  8. #8
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,221
    Blog Entries
    1

    Default

    The bottom of the tank thingie?
    That is the flapper.
    Many flappers have a hole on the bottom. Maybe all but a few.
    Also many other things may have holes. I'm thinking thata Swiss Cheese has holes, and so can wood with termites have holes in it.
    Also strainers have holes. If I count the holes in my shirt I count four, except if I look at a button down shirt, and then I count 13.

    The red thing, that's the tank to bowl gasket.
    Last edited by Terry; 11-30-2013 at 04:56 PM.

Similar Threads

  1. 10 7/8" rough? Cadet 3 or Drake cheaper?
    By busmechanic in forum Toilet Forum discussions
    Replies: 4
    Last Post: 03-04-2011, 04:33 PM
  2. Need 10" rough and round front; 1.6 gal versus 1.28 gal Cadet 3
    By jerr in forum Toilet Forum discussions
    Replies: 1
    Last Post: 08-24-2010, 12:23 PM
  3. New American Standard Cadet 3 elongated is 3" off the wall
    By HC in forum Toilet Forum discussions
    Replies: 7
    Last Post: 02-15-2010, 10:51 AM
  4. Toto Eco Drake or AS Cadet 3 Flowise for 10" rough-in
    By stickers11 in forum Toilet Forum discussions
    Replies: 3
    Last Post: 10-18-2009, 09:49 AM
  5. American Standard Cadet vs Toto Reliance: 14" rough-in models
    By simmons in forum Toilet Forum discussions
    Replies: 3
    Last Post: 10-08-2005, 12:44 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •