(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Building-up an existing shower curb

  1. #1
    DIY Member SH140's Avatar
    Join Date
    Jan 2013
    Location
    Vallejo, Ca.
    Posts
    54

    Default Building-up an existing shower curb

    I recently installed a pre-formed shower pan and curb from Laticrete. It's made of some sort of dense foam. The whole thing is coated with HydroBan. After installation, I see that I would prefer that it be higher than 1 1/2" on the inside. Before I tile that area, is there a method to raise the height a few inches? I was thinking of wood, brick, or mortar/cement, but didn't know if any of these methods were acceptable, or how to bond them to the existing curb, or if they would be sturdy enough to tile over.

    Does anyone have any detailed feedback if this is possible, and how to do it?

    Hope you all have a Happy Holiday


    P.S. Would another pre-formed curb (Noble or Laticrete) added on top of original be a better option? If so, what's method to attach one to the other?
    Attached Images Attached Images   
    Last edited by SH140; 11-27-2013 at 09:22 AM.

  2. #2
    ACO Shower Drain Sales johnfrwhipple's Avatar
    Join Date
    Jul 2009
    Location
    North Vancouver, BC
    Posts
    2,978
    Blog Entries
    5

    Default

    You could build it up a lot of different ways. I would use some concrete board and cut strips and set them to the exisiting Curb with thin-set (taping all of it with a wide mesh tape). Wait a few days and then re waterproof the top and inside of the curb. Leave the face (dry side) un waterproofed.

    I don't see any re-inforcing fabric in the corners and the one wall does not look waterproofed. This pan is designed to be a topical waterproofing process.

    JW


    jfrwhipple@gmail.com - www-no-curb.com - 604 506 6792

    Always get construction advice double checked by your local city hall. Flood Test Every Shower - Every Time.

Similar Threads

  1. how to handle shower curb
    By diyfun in forum Shower & bathtub Forum & Blog
    Replies: 4
    Last Post: 11-19-2013, 07:22 PM
  2. Lip/curb for a shower?
    By netrate in forum Shower & bathtub Forum & Blog
    Replies: 5
    Last Post: 09-02-2013, 10:54 AM
  3. Shower Curb / Custom Shower Questions
    By n0teye in forum Shower & bathtub Forum & Blog
    Replies: 3
    Last Post: 08-30-2011, 06:05 AM
  4. Sunken Shower - depth, curb, or ramp
    By Jelly in forum Shower & bathtub Forum & Blog
    Replies: 3
    Last Post: 07-16-2009, 08:42 PM
  5. building a shower curb with composite pan
    By dirt diggler in forum Shower & bathtub Forum & Blog
    Replies: 4
    Last Post: 08-21-2007, 07:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •