Sjsmithjr
In the Trades
Although it is secured (stapled) within 12 inches of the connector, I'm not crazy about the routing of the NM-B to the exhaust fan as shown in the attached pic. Running the NM-B back over the top of the fan housing doesn't seem like a great idea to me either. Considered adding a 1x4 raceway but the fan exhaust is in the way. Would there be anything wrong with running an appliance whip over the top of the housing to a junction box mounted to the engineered truss and then running NM-B from there? Just seems like it would be safer. (Also - If you look closely there is a knock out plug missing. It will be replaced.)
Thanks,
Sam
Thanks,
Sam
Last edited: