I recently discovered that water pressure in my house it too high and tried to adjust it on the water pressure regulator.
The problem is that the pressure that I set at 50psi increases to about 80 if I check it as the first thing in the morning. I assume that there is a ‘leak’ inside the regulator and pressure rises when there is no water drain/consumption inside the house.
As the outside pressure in our area reaches 180psi, I am considering fixing or replacing regulator to be on the safe side.
- Would you recommend to try fixing it?
- I see very similar looking Watts units, would you recommend using it as a replacement?
The problem is that the pressure that I set at 50psi increases to about 80 if I check it as the first thing in the morning. I assume that there is a ‘leak’ inside the regulator and pressure rises when there is no water drain/consumption inside the house.
As the outside pressure in our area reaches 180psi, I am considering fixing or replacing regulator to be on the safe side.
- Would you recommend to try fixing it?
- I see very similar looking Watts units, would you recommend using it as a replacement?
Last edited: