I do not know which brand of faucets I have in my bathtub but there is water coming out of the spout when the faucets are turned off. I opened the faucets to try to pull the stem and see if the washers were leaking.
I am stuck at this point though...I remove the caps and covers but I have a solid round piece and do not see any nuts to remove the stem. There is a white plastic piece where the handle snaps on and that piece pops off.
What I have noticed is that if we turn the handles to the off position; it will take around 15-20 seconds before any water starts coming out of the spout....
I also see "Sears 609-204810" on the cover to the handle.
I have attached a photo of what I am looking at...
Also at this page: https://www.dropbox.com/s/crj1uh34t3embvg/faucet.jpg
Thanks for any pointers....
I found out which setup I have..
I am still open to any suggestions if anyone sees anything obvious from the pictures of the stem...
Last edited by riddlebox; 09-30-2013 at 07:57 PM. Reason: Found the parts and type...
Sears doesn't make their own faucets, but since you have a model number they can get the parts for it.
Licensed residential and commercial plumber