(Radiant floor board heating) I have plumbed the outdoor water lines (from Central Boiler 1450 furnace) into the existing indoor (pressurized) heating lines.
I have included ball valves to separate the two water systems when one is running. Additionally, Central Boiler requires installation of their thermostatic valve (which returns water before integrating into
the existing system if the temp of the water is not above 150 degrees). I am having an issue when I open the valves to run the wood furnace, water from the in house system back drains out the wood furnace.
I have yet to test the wood furnace until I resolve this issue. Any assistance is appreciated.
I can add more info as you require.
bkmeis
I have included ball valves to separate the two water systems when one is running. Additionally, Central Boiler requires installation of their thermostatic valve (which returns water before integrating into
the existing system if the temp of the water is not above 150 degrees). I am having an issue when I open the valves to run the wood furnace, water from the in house system back drains out the wood furnace.
I have yet to test the wood furnace until I resolve this issue. Any assistance is appreciated.
I can add more info as you require.
bkmeis