DanMcD
Member
I had my bathroom remodeled with a new Toto Drake II toilet. The installer had to keep adjusting the center flush valve nut to get the tank to sit tight and not rock. It seems to be a very stiff rubber gasket that seems to flatten out some over time. He finally got the tank to not rock, but it sits on the center and right porcelain feet, but not quite touches the porcelain foot on the left side.
In any case, the tank still leaks and it seems to be coming from the right side tank bolt. He took off the tank and re-seated the bolts but it still leaks at that right side bolt.
Why is this so hard to get it right? Could the Toilet be defective?
Advise?
In any case, the tank still leaks and it seems to be coming from the right side tank bolt. He took off the tank and re-seated the bolts but it still leaks at that right side bolt.
Why is this so hard to get it right? Could the Toilet be defective?
Advise?