Price Pfister Avante. How to remove a stem from shower?

Users who are viewing this thread

templeavenue

New Member
Messages
10
Reaction score
0
Points
0
Location
San Diego
I need to fix the leak from the shower head.

I search on the web and I THINK it is a moen single handle type.

I think it's similar (maybe the same) as this one https://terrylove.com/forums/showthread.php?25556-Shower-Faucet-Identification

I saw some videos and a bit confused what/how to do.. Remove the whole thing or just the cartridge using a special tool..

I have attached some pics..

Can someone guide me how to fix it? And what tools I would need to do the job.
 

Attachments

  • 20130813_071837.jpg
    20130813_071837.jpg
    31.2 KB · Views: 1,262
  • 20130813_071936.jpg
    20130813_071936.jpg
    47.1 KB · Views: 4,791

hj

Master Plumber
Messages
33,608
Reaction score
1,047
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
It is NOT a Moen. It is a Price Pfister Avante valve. I fixed one yesterday and it was NOT a DIY job the homeowner could do himself, although he did give it a valiant effort to do it.

pp_avante_valve.jpg


avante-cartridge.jpg
 
Last edited by a moderator:

templeavenue

New Member
Messages
10
Reaction score
0
Points
0
Location
San Diego
It is NOT a Moen. It is a Price Pfister Avante valve. I fixed one yesterday and it was NOT a DIY job the homeowner could do himself, although he did give it a valiant effort to do it.


Thanks HJ. I found a clip similar to the one I have. From the video, it seems like not that difficult to do it (assuming using the right tools).

Can you explain which part is difficult?

Thanks
 
Last edited by a moderator:

templeavenue

New Member
Messages
10
Reaction score
0
Points
0
Location
San Diego
The one I did, and yours appears to be the same way, had the nut so corroded that it was VERY difficult to loosen it without distorting it.

Do you know if I use the penetrating oil will make easy loosing the nut?
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Do you know if I use the penetrating oil will make easy loosing the nut?
The mineral deposit might respond better to a paper towel soaked in vinegar, then covered with some plastic and held in place with a rubber band overnight. Metal corrosion is one thing, adding mineral deposits onto/into the threads is another.
 
Top