Converting 3/8"OD x 3/8"OD supply line to 3/8"ODx1/2"IPS

Users who are viewing this thread

SuperAcer99

New Member
Messages
20
Reaction score
0
Points
1
Location
Arizona
I bought a 20"long 3/8"OD x 3/8"OD stainless steel faucet supply line and it turns out I didn't need it. Since most household faucet supply lines are 3/8"OD by 1/2" IPS, I was wondering if there is an adapter than could "covert" this hose to 3/8"x1/2"IPS to where I can use it around the house? If not, where could I use this supply line?
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
I wouldn't be surprised if you could find adapter(s) that would work. HD has a pretty wide selection that I am aware of and there are likely other places as well. Thing is though, you might end up with more expense in adapters that saving the supply line is worth.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks