richard8
Member
Hello,
I have a question regarding installing a new fill valve for my toilet.
Please let me know of any suggestions. I just want to make sure I am doing this correctly.
My actual supply line nut is made of metal.
For the flange lock nut that holds the stem of the fill valve. This stem is the portion extended from toilet tank. Is this suppose to be tighten to snug, then and 1/4 turn. Hand finger tighten only.
Also, for the braided stainless steel pressure hose. Is this suppose to be tighten to snug, then and 1/4 turn - 3/8 turn. Hand finger tighten only.
Do not use any wrenches or pliers, or any hardware tool.
Is this correct.
Thank you
I have a question regarding installing a new fill valve for my toilet.
Please let me know of any suggestions. I just want to make sure I am doing this correctly.
My actual supply line nut is made of metal.
For the flange lock nut that holds the stem of the fill valve. This stem is the portion extended from toilet tank. Is this suppose to be tighten to snug, then and 1/4 turn. Hand finger tighten only.
Also, for the braided stainless steel pressure hose. Is this suppose to be tighten to snug, then and 1/4 turn - 3/8 turn. Hand finger tighten only.
Do not use any wrenches or pliers, or any hardware tool.
Is this correct.
Thank you