(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: wall hung Duravit toilet

  1. #1
    DIY Junior Member urufenta's Avatar
    Join Date
    Jul 2013
    Location
    rochester ny
    Posts
    3

    Default wall hung Duravit toilet

    Just when I was ordering a Starck 2 wall hung toilet and matching bidet I read multiple complaints about the toilet " not flushing well" . Is that the toilet or improper installation? Anyone has installed and or used this particular toilet and can comment on it? Thanks

  2. #2
    DIY Senior Member wjcandee's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    1,587

    Default

    Here's a wall-hung that flushes very well, and works with the Geberit in-wall tank as well as the Toto in-wall tank.

    http://www.totousa.com/ProductDetail...ProductID=1218

    And here's another:

    http://www.totousa.com/ProductDetail.aspx?ProductID=630

    I love Phillippe Starck. Been to the club he designed in Dallas (featured in "RoboCop"). Stayed in the Paramount Hotel when he refurbished it. Have one of his toothbrushes, as well as a bunch of his nick-nacks. Not a fan of his toilet, though. Have 3 wall-hungs in our beach house. The Toto wall-hungs that were installed at our club recently perform flawlessly.

    And for what it's worth, here are the Toto bidets, if you don't want to mix and match brands. Some are part of suites with Toto toilets, but not with any wall hungs.

    http://www.totousa.com/Products/Bidets/Search.aspx

    Figure actual price is 30-40 percent off of list price.
    Last edited by wjcandee; 07-16-2013 at 04:29 PM.

  3. #3
    DIY Junior Member urufenta's Avatar
    Join Date
    Jul 2013
    Location
    rochester ny
    Posts
    3

    Default

    Thanks. I looked it up and the problem seems to be the lack of a matching pair toilet/bidet. That is why I defaulted to Duravit, even if Toto seems to be a better quality product. However, why do so many people in different web sites complain about the flushing w/ the Duravit? Is it poor installation? Do europeans use more gpf?

  4. #4
    DIY Senior Member wjcandee's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    1,587

    Default

    A poor flush is usually a function of the design of the route by which the waste exits the bowl, and, to some extent, the route that the water takes through the bowl.

    As to the Europeans...nope -- it's not that they use more water. In fact, "more water" would seem to be a panacea for all poor flushes, but I am here to tell you that it isn't. You can empty three times the usual amount of flush water into a crappy low-flow and it isn't going to keep the waste from clogging it. On the other hand, Toto was able to reduce the amount of water through some of its floor standing models from 1.6 to 1.28 gallons per flush, and still have a greater than 1000 MAP score, because the design of the trapway was so ingenious.

    My worst toilet ever was a gorgeous Kohler Portait low-flow with the "ingenium" flush that matched the beautiful sink we installed in the same room. After a couple of years of clogging on absurdly-low amounts of solid material, I hit it with a sledgehammer (happiest moment in a long time) and replaced it with a Toto Drake. It was the design, pure and simple, that was the problem, and I am still amazed that Kohler had the audacity to sell it. It was beyond terrible. (I don't know how the current version of this toilet compares; they may have improved it. Or not.)

    One thought -- something doesn't have to be in a "suite" to be complementary in design. Just because the manufacturer thinks that one thing "goes with" the other doesn't mean that nothing else does. Get your Starck bidet if you want, and match it to either one of the Toto wall-hungs, and you should be happy both with the look and the performance. My Toto goes very nicely with the Kohler Portrait sink. Oddly, nobody has noticed that the toilet looks different; they only notice that the toilet works -- I usually get told by folks who had used the old toilet, "Oh, you fixed the toilet in there." (embarrassing to see how many noticed how poorly it flushed) They don't notice the fact that the two items don't "match".
    Last edited by wjcandee; 07-16-2013 at 04:27 PM.

  5. #5
    DIY Junior Member urufenta's Avatar
    Join Date
    Jul 2013
    Location
    rochester ny
    Posts
    3

    Default

    Well I have not considered the option, since the toilet/bidet sit so close to each other I tought it would be and obvious difference. Another option is to spend a fortune in a Toto "does it all" unit....thanks for your help wjcandee.

  6. #6
    DIY Senior Member wjcandee's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    1,587

    Default

    Well, one other thought is to look at bidet seats by Toto or others, which can be seen here on Terry's site: http://terrylove.biz/12-bidet
    The INAX seats are very popular in Japan.
    Last edited by Terry; 01-28-2014 at 05:48 PM.

Similar Threads

  1. Replies: 1
    Last Post: 11-29-2011, 11:51 AM
  2. Wall hung Toto Aquia vs. Duravit Starck 3
    By qt314b in forum Toilet Forum discussions
    Replies: 3
    Last Post: 07-25-2011, 02:29 PM
  3. Parts needed for Duravit Wall Hung Toilet install?
    By kuhndog in forum Toilet Forum discussions
    Replies: 1
    Last Post: 03-26-2010, 01:18 PM
  4. How to vent duravit/geberit wall hung toilet
    By Jelly in forum Toilet Forum discussions
    Replies: 22
    Last Post: 10-28-2009, 04:18 PM
  5. duravit wall hung toilets
    By robinm in forum Toilet Forum discussions
    Replies: 1
    Last Post: 10-02-2007, 02:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •