(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Plumbing Multiple Heads, some questions

  1. #1
    DIY Junior Member terpjr's Avatar
    Join Date
    Jul 2013
    Location
    NY
    Posts
    1

    Default Plumbing Multiple Heads, some questions

    Hi all,
    I am installing a new master bath in my house and I have a couple of shower questions that I can not find consistent answers to online.

    I am planning on 3 heads...a normal shower head, an overhead "rain" head and a hand held wand mounted on a side wall.


    I have a delta r10000 universal valve and a delta r11000 3/6 rough diverter.

    I understand that the mixer feeds theee diverter, and that the diverter can then feed three heads. The diverter can be used with a 3 setting or a 6 setting selector trim, the cartridge comes with the trim. We would go with the 6 setting which will allow any head to be used individually or any 2 used together.

    The pieces came with 1/2" inlets, is this adequate? should i try to find a company that has 3/4". We are not using body sprays.

    Do I need a pressure balancing loop in this situation? If so, does anyone have a diagram of this?

    I am not new to installing showers...but have never done multiple heads.

    Has anyone worked with these Delta models before? any hints/tricks?

    Thanks.

  2. #2
    ACO Shower Drain Sales johnfrwhipple's Avatar
    Join Date
    Jul 2009
    Location
    North Vancouver, BC
    Posts
    2,968
    Blog Entries
    5

    Default

    I would think that the divetor will adjust the pressure evenly and that you should go with the any two option. With no body jets 1/2" lines is fine I'm sure.


    jfrwhipple@gmail.com - www-no-curb.com - 604 506 6792

    Always get construction advice double checked by your local city hall. Flood Test Every Shower - Every Time.

Similar Threads

  1. Maximum number of shower heads on a inch and half plumbing drain line
    By johnfrwhipple in forum Shower & bathtub Forum & Blog
    Replies: 7
    Last Post: 11-20-2010, 09:36 AM
  2. Rough Plumbing for Delta multiple shower heads in Tub/Shower?
    By jsarin1 in forum Shower & bathtub Forum & Blog
    Replies: 6
    Last Post: 10-15-2010, 08:22 AM
  3. Plumbing for shower with two heads
    By jdanbury in forum Shower & bathtub Forum & Blog
    Replies: 1
    Last Post: 01-08-2009, 05:28 PM
  4. Pex Plumbing Questions
    By ando1048576 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 7
    Last Post: 07-03-2007, 09:52 AM
  5. Multiple Shower Heads Question
    By Photovor in forum Shower & bathtub Forum & Blog
    Replies: 0
    Last Post: 07-03-2006, 07:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •