Slight twist in 2/12 NM-B

Users who are viewing this thread

pex006

Member
Messages
43
Reaction score
0
Points
6
Location
Pittsburgh, Pennsylvania
Hi. While looking around at the other wiring in my house after finding a cable in my return air duct. I found this yellow section of 2/12 NM-B. It is all stapled very flat and looks to run pretty well except when they made a turn through a hole to cross between two joists a section has a slight twist to it across the two foot joist space. Is this a problem or nothing to worry about. Here is a picture of the yellow twisted section. This is the only section that has the twist.



Cable.jpg
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks