(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Pressure regulators die on a regular basis.

  1. #1
    DIY Senior Member Homeownerinburb's Avatar
    Join Date
    Jan 2012
    Location
    Los Angeles, CA USA
    Posts
    505

    Default Pressure regulators die on a regular basis.

    Guys,

    My municipal water pressure comes at me at 150psi, how they keep the pipes under the streets whole, I don't know. But I assume the Fire Captain is happy.

    I've been in this house 12 years and I have replaced many pressure regulators. Some years back I rebuilt all the manifold coming at the house with two ball valves and behind those are two 3/4" Wilkins pressure regulators that I can just drop out by backing off the two unions.

    One protects the house, the other protects all the sprinklers, I have a lot of sprinkler valves. One split in half the other day and was weeping. I put the pressure gauge on and the pressure was at 150 lbs, of course.

    So off to the store for a new regulator. The damned things cost more than $70.

    Is it practical to rebuild them? Where do I find the kits for CHEAP?

    And I suppose there is nothing I can do about them croaking under the 150 lbs from the city, can I?

  2. #2
    Plumbing Contractor for 49 years johnjh2o1's Avatar
    Join Date
    Aug 2009
    Location
    South*East
    Posts
    1,121

    Default

    You can try a two stage set up. Watts recommends this set up when the incoming pressure is very high. There is the possibility that during times of low demand the city main may reach these pressures.

    http://www.watts.com/pages/learnabou...ves.asp#sizing

    John

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default Prv

    Wilkins is NOT my first recommendation for a PRV. I prefer Honeywell/Braukman. They last longer and are much easier to repair.
    Licensed residential and commercial plumber

Similar Threads

  1. main water line has two pressure regulators???
    By tikicarver in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 8
    Last Post: 10-08-2012, 12:17 PM
  2. Replies: 10
    Last Post: 10-24-2011, 05:52 PM
  3. Toto Ultramax clogs on regular basis
    By SnigglePuff in forum Toilet Forum discussions
    Replies: 13
    Last Post: 10-28-2008, 03:32 PM
  4. converting regular tolet to Pressure flush
    By Jack Hibbler in forum Toilet Forum discussions
    Replies: 10
    Last Post: 02-14-2006, 08:18 AM
  5. Propane regulators
    By Mark in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 0
    Last Post: 11-13-2004, 05:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •