(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Toilet rough in questions

  1. #1
    DIY Junior Member burnttoast77's Avatar
    Join Date
    Jun 2013
    Location
    Savannah, GA
    Posts
    4

    Default Toilet rough in questions

    Hey all, fresh newb here in Savannah, GA.

    Here is my plan to rough in my toilet:

    Flange connected to:
    14" long piece of 3" PVC to:
    3" 90 long sweep elbow or closet flange to:
    3" sanitary tee.

    Lower part of San tee to:
    5" long piece of 3" PVC to:
    3" 45 elbow to:
    3" wye on side, clean-out on one side to:
    3"x4"x4" wye hooked up to the cast iron horizontal drain line

    And just realized it'd be way better to draw it. I'll try and get that done. I am mainly concerned about the drop right under the toilet flange. I need it to connect the tub waste line above the toilet San tee just wanted to make sure it was kosher.
    Last edited by burnttoast77; 06-17-2013 at 06:56 PM.

  2. #2
    DIY Junior Member burnttoast77's Avatar
    Join Date
    Jun 2013
    Location
    Savannah, GA
    Posts
    4

    Default

    Name:  IMG_20130617_215419_988.jpg
Views: 106
Size:  39.6 KB

    Here it is, kinda, lol.

    And I have the shower vent and lav vent connect at the way top of this stack. so each fixture has its own vent.

  3. #3
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,208
    Blog Entries
    1

    Default

    That works with the 2" veritcal pipe on the vent.

  4. #4
    DIY Junior Member burnttoast77's Avatar
    Join Date
    Jun 2013
    Location
    Savannah, GA
    Posts
    4

    Default

    Wow, from Terry himself! Thanks a bunch - I tried to get as much as I could out of the codes, but I just wanted to make sure.

    Thanks again.

Similar Threads

  1. Toilet supply rough-in questions
    By jastori in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 03-21-2011, 02:01 PM
  2. Some basic toilet replacement questions, 10.75" rough
    By DennisF in forum Toilet Forum discussions
    Replies: 3
    Last Post: 05-02-2010, 08:50 AM
  3. Rough in questions
    By cruzer in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 01-18-2008, 07:55 AM
  4. Toilet rough-in questions
    By retskcir in forum Toilet Forum discussions
    Replies: 8
    Last Post: 10-26-2005, 07:20 PM
  5. Basement Rough -in questions
    By carzy in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 01-29-2005, 10:25 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •