Hay again. I'm asking about settings for the clack tc model.
1 person household
The system is existing & was installed for a family of 5. I don't know what's in the resin tank but the (clack) tag says :
10 x 54
Test results for well h20 (in mg/L):
Total alkalinity: 160
Ortho phosphate: ND
About 75 more tests for organics : all ND
Currently using program #1 w/ following :
1 backwash: 8 min
regenerate: 50 min
2 backwash: 8 min
rinse: 4 min
fill: 8 min
days between: 14
Because of low water use I opted for 2nd backwash. Is this reasonable or simply unneccessary? My water stays soft thru 14 days - could I go longer? Should the fill time be adjusted? Basically i'd like some advice w/ these settings.