(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Will my whites match??

  1. #1
    DIY Junior Member jen in brookline's Avatar
    Join Date
    Jun 2013
    Location
    brookline, ma
    Posts
    1

    Default Will my whites match??

    Hi All,

    First, Terry this is an amazing site and forum, I have learned so much!

    As a result of my research on this site my husband and I are planning to use a Toto Aquia in our tiny master bath renovation. The difficulty is that we don't really like the Toto sinks. We found a Jado Porcher sink we like but my concern is that the whites won't match. Our master bath is less than 8 feet by 4 feet so the sink and toilet are literally just inches apart. We are planning to use Dal Tile Artic White subway tiles in the shower and on the walls.

    Are our whites going to work together or clash horribly?!!? We were going to go with Toto Cotton White and Jado Porcher white, but I have read that Toto's Colonial White may be a better match. I have ordered the samples from Toto and Jado Porcher and have the Dal Tile on hand, but this is just maddening. What would you do? What do you recommend? I really want the Aquia toilet, but don't particularly like the Toto sinks (we want a wall mount sink with a towel bar, they don't have any).

    How bad will it look if all the whites are a little off. We are doing chrome fixtures throughout bathroom fwiw.

    Thanks for any and all ideas, theories and feedback!

    Jen

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,390

    Default

    Slightly different angles and lighting can make even the same whites look different. Check the samples, then decide. If you were to go to any paint store, look at the quantity of white color chips...sometimes very subtle differences. Hard to say without seeing it in your lighting.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,624

    Default whies

    WHAT the color is applied over will also change the shade even from the same manufacturer. White applied over gray cast iron will appear different than white applied over "white" china, or yellow fiberglass. And as mentioned, the way the light hits at various angles also "fools" the eye.
    Licensed residential and commercial plumber

  4. #4

    Default

    I think it would match, only one way to find out though.

Similar Threads

  1. What whites best match Kohler white?
    By jcwconsulting in forum Shower & bathtub Forum & Blog
    Replies: 7
    Last Post: 09-27-2011, 09:49 AM
  2. What whites best match Kohler white?
    By jcwconsulting in forum Remodel Forum & Blog
    Replies: 0
    Last Post: 09-24-2011, 01:33 PM
  3. Matching Whites
    By Mike50 in forum Remodel Forum & Blog
    Replies: 26
    Last Post: 12-28-2009, 05:39 PM
  4. whites yellowing
    By Trudie in forum Pumps and Tanks Well Forum & Blog
    Replies: 1
    Last Post: 04-29-2006, 03:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •