Ugh. Tapping into sanitary T below basement slab.

Need to run 2" shower drain to this 3" stack. Wasn't expecting a long sweep sanitary T to be just below the slab. Cutting out the T isn't much of an option since there's fittings immediately to the left and right so no open run for a union.

Maybe a saddle of some sort? Cutting/jacking out more of the slab is not a good option.

Could sure use some helpful suggestions. Photo is rotated 90 deg - damn iPhone.

Much thanks.

A sanitary tee would not be permitted in that position; that is a TY fitting.
Your connection will need to be made further downstream in the horizontal run. The shower will also need a separate vent.

I would break out more concrete, add a wye and vent futher downsteam. I concur.

Terry said:

I would break out more concrete, add a wye and vent futher downsteam. I concur.

Click to expand...

Not what I was hoping to hear but probably the only acceptable solution.

Thanks for the replies.

drain

NO SADDLE!!! And your shower drain will have to have a vent.