Flek 7000sxt constant drain

Users who are viewing this thread

Cobra1365

Member
Messages
49
Reaction score
1
Points
8
Location
Delaware
just installed a new neutralizer tank with Fleck 7000sxt. As soon as I came out of bypass, the system started draining. Tried depowering but it goes to drain each time I come out of bypass.
 

Cobra1365

Member
Messages
49
Reaction score
1
Points
8
Location
Delaware
Disassembled verything and started from the beginning again. Did not see any foreign matter or anything that I missed. Forced a maual regen and everything seems to be working now. Just one of those queertrons I guess.

I'll keep an eye on it over the next couple of days to make sure everything is working as advertised.
 

ditttohead

Water systems designer, R&D
Messages
6,088
Reaction score
455
Points
83
Location
Ontario California
Check out the video in my signature. It will show you the syncronizing of the valve. Be sure the "S" is lined up with the arrow.

Hope this helps.

FYI, the filter valve and softener valve syncronize in different positions, but the letter "s" is the service position.
 

Cobra1365

Member
Messages
49
Reaction score
1
Points
8
Location
Delaware
Question...what does the turbine do? There is not one in my unit (neutralizer, not a softener).
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks