(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Can someone help me figure out the problem?!?!

  1. #1
    DIY Junior Member danreg99's Avatar
    Join Date
    May 2013
    Location
    North Dakota
    Posts
    2

    Default Can someone help me figure out the problem?!?!

    I installed my sprinkler system 2 years ago and have not had a problem until this weekend. After blowing out all sprinkler zones this last fall(3 times) I go to start them up and 4 total sprinklers are not popping up (2 sprinklers on 1 and 2 on the other). I have pried up the sprinklers and there is nothing. The rest of the sprinklers are functioning fine and I am not seeing any pooling of any kind anywhere. This is a 1 inch poly sprinkler system (lateral lines too) in ND. We just got done having 1 of the worst winters (lots of snow and very cold). Is it possible that some snow/water backed up into the line and is still frozen? Do I have a water break on 4 separate lateral lines? I have attached a diagram ( I apologize for the crude drawing). I don't want to start tearing out my yard yet in case it is ice. Thanks for any info!
    Attached Images Attached Images  
    Last edited by danreg99; 05-08-2013 at 07:52 AM.

  2. #2
    DIY Junior Member danreg99's Avatar
    Join Date
    May 2013
    Location
    North Dakota
    Posts
    2

    Default

    It was ice. Thanks for all the great advice and insight!

Similar Threads

  1. VERY annoying electrical problem - cannot figure out - Pro advice needed
    By zer0123 in forum Electrical Forum discussion & Blog
    Replies: 6
    Last Post: 09-04-2010, 06:35 PM
  2. trying to figure out pex fitting manufacturer
    By Rocketdoctor in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 7
    Last Post: 04-10-2009, 05:35 PM
  3. Please help me figure this out!
    By mrsjulie in forum Toilet Forum discussions
    Replies: 5
    Last Post: 04-01-2009, 01:10 PM
  4. Can't figure this out! Need some elec. know-how
    By stockwatchn in forum Electrical Forum discussion & Blog
    Replies: 5
    Last Post: 02-01-2009, 12:03 PM
  5. Trying to figure out shower drain rough-in..
    By iminaquagmire in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 11
    Last Post: 05-30-2008, 01:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •