bergs54
New Member
I've been reading this forum for a while and have found some really helpful advice and a vast amount of knowledge. Drawing on that advice, I have sketched out a design for the plumbing in my bathroom which is going to be remodeled shortly. The toilet and tub will be staying in the same locations. I will be adding a double lav and therefore the location of the existing one will change slightly. I have also attached a photo of the existing lav/toilet/main/vent connection. Some background:
1) Total DFU's on house: 23
2) Main line is 4" Cast Iron
3) Existing vents through roof: 4" for main line/toilet (which I plan to replace with a 3"), 1.5" for shower and tub, 1.5 inch for kitchen.
Basically, I would like to know if the drawings I have attached will fly. Thanks!
1) Total DFU's on house: 23
2) Main line is 4" Cast Iron
3) Existing vents through roof: 4" for main line/toilet (which I plan to replace with a 3"), 1.5" for shower and tub, 1.5 inch for kitchen.
Basically, I would like to know if the drawings I have attached will fly. Thanks!
Attachments
Last edited: