Altmans Suite 10 Tub Faucet

Users who are viewing this thread

TRH

New Member
Messages
6
Reaction score
0
Points
0
Location
Bainbridge Island, WA
My Altmans Suite 10 tub faucet leaks. When I turn on the hot water I get about 90% of the water coming out at the spout and the remaining 10% from under the handle. When I turn on the cold water (when the hot is off) I get about 5% of the water coming from the hot handle. I can't figure out how to remove the cartridge from the top and there is no easy access to the bottom of the tub. To get to the bottom I will have to cut out a small section of the wall. So far I have not found a parts diagram on the internet. Any comments or info will be appreciated.
Thanks, Tom

http://www.altmansproducts.com/index.php/usereu
 
Last edited by a moderator:

TRH

New Member
Messages
6
Reaction score
0
Points
0
Location
Bainbridge Island, WA
Thanks for the reply. I have checked the Altman web site and it appears to be brochures for their current products. The faucet I have was installed about 1993 and is not listed in their catalog. I cannot determine how to take it apart. I can take off the decorative parts, but cannot get the stem out. If I could find a parts diagram I think I could figure out how to take it apart.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks