Has anyone had problems with the ws1 cs drain assy. Slightly leaking out of the outer retainer clip holes when its draining. Mine is slightly dripping out of the 2 outer holes where the red clip snaps into the holes. Checked the o ring and it looks fine and lubed with silicone.
Also checked the round white dlfc retainer button housing. It has a flat spot on shoulder, not sure if its designed that way or a defect
Any suggestions would be appreciated.
Last edited by tntent805; 05-03-2013 at 02:10 AM.
Replace the o-ring, this is not uncommon.
How to rebuild a softener http://www.youtube.com/watch?v=8YkJS...ature=youtu.be