estein9
New Member
I just purchased my first ever water softener (Watts with Clack WS1 with 1.5 cu. ft. of resin rated for 45,000 grains using the standard 8% resin). The dealer who sold me the Watts system was able to have Watts swap out the standard 8% resin and use 10% resin free of charge. Does the change in resin change the total grains the 1.5 cu. ft. can treat? If yes, is there a way to determine what the new total grain capacity is?
Does the change from 8% to 10% resin require a different type of riser screen be used within the resin tank?
Thank you in advance for any insight you can provide.
Does the change from 8% to 10% resin require a different type of riser screen be used within the resin tank?
Thank you in advance for any insight you can provide.