A run in 1" plastic conduit from the main panel to power a stove and a microwave. So individual conductors will be used.
Stove is on 50A breaker with #8 wire, microwave on 20A breaker with #12 wire.
The 1" plastic conduit will be run to a junction box and will contain four #8 conductors(red,black,white ,green) and one #12 conductor(blue).
Question is....in the junction box can the #8 neutral and ground be connected to #12 neutral and groung conductors for the run to the microwave?
Kind of like the diagram. Although I did not show the red and black for the stove continuing because it was getting crowded in the drawing.
Stove is on 50A breaker with #8 wire, microwave on 20A breaker with #12 wire.
The 1" plastic conduit will be run to a junction box and will contain four #8 conductors(red,black,white ,green) and one #12 conductor(blue).
Question is....in the junction box can the #8 neutral and ground be connected to #12 neutral and groung conductors for the run to the microwave?
Kind of like the diagram. Although I did not show the red and black for the stove continuing because it was getting crowded in the drawing.
Attachments
Last edited: