Setting recommendations,
My softener is a 2cf softener with Clack WS-1 CS and regular resin. Using morton solar salt.
The controller is currently set to P14 which if I'm reading the manual correctly should give me
BW = 8
Brine / Slow Rinse = 60
2nd BW = 6
Fast Rinse = 6
Day Override setting = 14
City water hardness is 21.6 ( per the water co ).
Softener hardness is set to 23.
Flow rate at hose bib = 16 gal. min.
1" water line.
4 adults in household, 3 full bath.
Do these settings seem ok or should I change ?
Tks.
My softener is a 2cf softener with Clack WS-1 CS and regular resin. Using morton solar salt.
The controller is currently set to P14 which if I'm reading the manual correctly should give me
BW = 8
Brine / Slow Rinse = 60
2nd BW = 6
Fast Rinse = 6
Day Override setting = 14
City water hardness is 21.6 ( per the water co ).
Softener hardness is set to 23.
Flow rate at hose bib = 16 gal. min.
1" water line.
4 adults in household, 3 full bath.
Do these settings seem ok or should I change ?
Tks.