JohnnyGig
New Member
I have a 50+ year old Ranch house plumbed with copper horizontal and risers. At each fixture there is a Brass 90 with Galvanized Nipples and standard cutoffs. My plan is to replace all the standard valves with 1/4 turn ball valve cutoffs. Since the nipples are rusty (of course), my plan was to go with Bra$$. Each 4" nipple costs about $6.00. I picked up Schedule 80 Nipples (grey) for $1.00 each.
I have never worked with Schedule 80 Nipples.
Are they suitable replacement for Galvanized?
Teflon Tape? Dope?
I have never worked with Schedule 80 Nipples.
Are they suitable replacement for Galvanized?
Teflon Tape? Dope?