Attn: Well Owners with IRB output Issues

Users who are viewing this thread

DUBLR

New Member
Messages
2
Reaction score
0
Points
0
Location
Nevada
I just joined to share a product and I have no connection with this product other than a one time user.

I live in No Nevada. Our well is 780' deep. We have heavy iron and Mag content requiring greensand filters. Our well output had been steadily diminishing. We installed a pump saver and a 1800 gallon cistern to combat it.

When our pump only ran 3.5 minutes and put out maybe 50 gallons, before the pump saver kicked in, it was time to drill deeper or figure out a solution. So I just happened on Bore Saver Ultra C.

This product is imported and has only been around a few years. In our area it is $250 for a well service call then and $1200 just to pull the pump. So I took a gamble and tried out Boresaver C and IKL. Results? Flow restored. FILLED my 1800 gallon cistern. The pump ran three hours straight with steady flow (clean out) and I shut it off.

Laval Underground is the importer. http://www.lavalunderground.com/ Their prime business is bore cameras. I figured anyone that can see the before and after, would not back a product unless it worked. Their distributor is Cannon water technology.

http://www.watercannon.com

Both Laval and Cannon were extremely helpful. This was safe and highly cost effective.

Just passing the word since I could not find any forum talk about this stuff.

BG
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks