(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Blown-in Insulation into Existing Wall

  1. #1
    DIY Member MAD King's Avatar
    Join Date
    Mar 2013
    Location
    Nashville, TN
    Posts
    47

    Default Blown-in Insulation into Existing Wall

    Hello,


    My friend and I had a discussion if it would be also possible to insulate the interior and exterior walls with blown in insulation through the attice.
    Normally you drill holes into the walls in the rooms. Can holes be drilled into the walls from the attic too and fill it with cellulose blown in?

    Thank you

  2. #2
    Test, Don't Guess! cacher_chick's Avatar
    Join Date
    Jan 2008
    Location
    Land of Cheese
    Posts
    3,154

    Default

    I think it is best to have an opening at both the top and the bottom of each stud bay, to make sure that it is being filled.

    I don't think anyone would try filling from the top because in most homes one would only have a few inches of space to work between the outer wall and the roof.

  3. #3
    DIY Member MAD King's Avatar
    Join Date
    Mar 2013
    Location
    Nashville, TN
    Posts
    47

    Default

    Would make sense. And of course on existing outside walls you have already some insulation bats in.

  4. #4
    In the trades Dana's Avatar
    Join Date
    Jan 2009
    Location
    01609
    Posts
    2,721

    Default

    Balloon-framed houses without top plates are easy to retrofit with blown insulation. If you're drilling through doubled-up top plates you have to keep the holes small enough to not degrade structure, which means you won't be snaking in a dense-packing hose. (In stud bays with batts it's usually possible and recommended to dense-pack over them, for superior air-tightness.)

    But first things first, what materials are in the wall stackup, starting with the exterior paint, all the way into the interior paint? (eg: Brick / 1" air cavity/ rosin paper / plank sheathing / studwall cavity / lath / plaster / foil wallpaper)

  5. #5

    Default

    Gotta know wall construction first before you change anything like Dana mentioned.

    If you change how the wall dries, the consequences can be disastrous.

Similar Threads

  1. Attic Blown In Insulation Remove Or Blow More Over It ?
    By Abouthadit in forum Remodel Forum & Blog
    Replies: 3
    Last Post: 03-27-2012, 12:14 AM
  2. Finished wall needs insulation
    By richrc1131 in forum Remodel Forum & Blog
    Replies: 7
    Last Post: 09-26-2011, 09:15 AM
  3. Blown- in fiberglass roof insulation
    By brenaud in forum HVAC Heating & Cooling
    Replies: 1
    Last Post: 09-23-2011, 09:30 AM
  4. Is blown in fiberglass insulation safe?
    By Walter Denton in forum HVAC Heating & Cooling
    Replies: 11
    Last Post: 05-03-2011, 01:28 PM
  5. Wall insulation around cabling - OK?
    By Fistor in forum Electrical Forum discussion & Blog
    Replies: 2
    Last Post: 06-16-2008, 12:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •