kregan
New Member
We can not find a way to remove this seal to get to the submersible pump in this well!!! We work on commercial swimming pool equipment so this is not our specialty.
My tech took the four bolts off after all other attempts failed to remove it?
We disconnected the union at the pressure release valve and then put a chain around the center piece. Then we connected a come-along to a chain which was hoisted straight up to a 4x4 we secured above it. Not even this would lift it off! We tried turning the center piece but it was not coming either? MY fear is that he should have NOT taken
these bolts out? Can anything save this job?
http://us-mg6.mail.yahoo.com/ya/dow...AACvrUVSmOwlhNEt8siI&pid=2&fid=Inbox&inline=1
My tech took the four bolts off after all other attempts failed to remove it?
We disconnected the union at the pressure release valve and then put a chain around the center piece. Then we connected a come-along to a chain which was hoisted straight up to a 4x4 we secured above it. Not even this would lift it off! We tried turning the center piece but it was not coming either? MY fear is that he should have NOT taken
these bolts out? Can anything save this job?
http://us-mg6.mail.yahoo.com/ya/dow...AACvrUVSmOwlhNEt8siI&pid=2&fid=Inbox&inline=1