JohnfrWhipple
BATHROOM DESIGN & BUILD
One question that gets asked a lot online is how to "Under Mount" a tub. It's a really good question because there is no real guidelines to follow, at least not from a tile installation point of view. I have been helping out this guy in Ontario (will call him Steve B) with some design ideas for his new bathroom renovation.
The best advice I can give you is make it TANK LIKE
To test my framing on this job I invited the client up on the prep work (prior to stone going in) and we jumped together. The prep work did not butch.
No movement - no vibration.
There is roughly a 4.5" set back shown here and a double strip of LED's under the face.
The best advice I can give you is make it TANK LIKE
To test my framing on this job I invited the client up on the prep work (prior to stone going in) and we jumped together. The prep work did not butch.
No movement - no vibration.
There is roughly a 4.5" set back shown here and a double strip of LED's under the face.
Last edited by a moderator: