(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: How to acurately determinng flow rate

  1. #1
    DIY Member tom3holer's Avatar
    Join Date
    Mar 2013
    Location
    Cape Cod
    Posts
    40

    Default How to acurately determinng flow rate

    Hi,

    Posted here several times before and am amazied by the excelllent help and advice. Thanks.

    I have a newly installed system that is giving me fits. First off it is way oversized.
    I do not see the D/T's that are expected and suspect flow rates in both the primary and secondary.
    Some of the zones have hidden plumbing in my old, 1860, home and determining the head is difficult.
    Is there a way to accurately read flow rates in zones and in the primary circuit?
    Are there pumps that you can dial in the desired flow rate? I see the Grundfos 15-55 shows a GPM reading on the face, but don't seem to read in the specs that you can actually dial in the gpm you want. There are flow meters but it seems they have to be plumbed into each line/zone. Costly and time consumig.

    Thanks for any advice.

    Tom

  2. #2
    Master Hot Water Mpls,MN BadgerBoilerMN's Avatar
    Join Date
    Mar 2011
    Location
    Minneapolis
    Posts
    285

    Default

    Who installed the system?

    Most must rely on temperature differential and pipe size to fix the flow. Some ModCons can be adjusted for gross output. The problem often lies in minimum unfortunately. We will need pictures, zones, boiler etc.

Similar Threads

  1. Pressure -vs- Flow rate ?
    By iamjcl in forum Pumps and Tanks Well Forum & Blog
    Replies: 12
    Last Post: 09-18-2008, 07:31 PM
  2. Flow rate mystery
    By dac9162 in forum Shower & bathtub Forum & Blog
    Replies: 5
    Last Post: 10-17-2007, 03:56 PM
  3. Low flow rate
    By Luther in forum Pumps and Tanks Well Forum & Blog
    Replies: 2
    Last Post: 06-24-2007, 07:04 PM
  4. water flow rate
    By meplumb in forum Shower & bathtub Forum & Blog
    Replies: 2
    Last Post: 02-24-2006, 05:47 AM
  5. Flow rate? Flow thru? Water softner restrictions.
    By polocash in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 03-29-2005, 10:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •